Build CAD and PCBs directly inside Claude Code/Codex
with Manti MCP

Try for free today!
Prompt: Build a compact robotics controller around the Waveshare ESP32-P4 module, about 50 × 40 mm on four layers, USB-C power with a PD sink the firmware can ask for 5 to 20 V, two motor drivers at 1.5 A with current limiting, an IMU, a Qwiic port, a LiDAR port, and parts JLCPCB stocks.
The ESP32-P4 robotics controller rev E in 3D: the module, two screw terminals, two pin headers, a USB-C corner

What came back: a 53 × 43 mm four-layer board with the PD sink and its sensed motor path, two bucks, two DRV8874 motor drivers, the IMU, the ports and the headers, as a KiCad 10 project with Gerbers, BOM and placement files. The board check passes with 0 opens and 0 errors, and an independent review says ready to order. built in the Manti app with the PCB engine Claude Code drives · layout revision 366 · 2026-09-30

Real parts and PCBs from written briefs. Each one is a project with its files, every version and its checks.

  • The quadcopter assembly from a three-quarter view above: a teardrop fuselage, four wings, four nacelles

    A quadcopter, 22 bodies

    Two fuselage halves on a sliding lap, four wings, four nacelles and motor plates, with stand-in motors and props.

    2026-10-09 · Claude Code · STEP, STL

  • A toroidal propeller: three looped blades on a bored hub

    A toroidal propeller

    Three looped blades and a bored hub, one solid, drawn in the viewer with its real edges.

    2026-09-27 · the Manti app · STEP

  • A 60 A GaN motor controller board: seven press-fit power terminals, three bus capacitors, the GaN stages, the MCU, a USB-C port

    A 60 A GaN motor controller

    ODrive-class field-oriented control, 24 to 100 V: 223 parts on six copper layers, with Gerbers, BOM and placement files exported. The board check is clean but for seven open connections.

    2026-09-25 · the Manti PCB engine · KiCad

  • The front copper of the ESP32-P4 controller rev E: traces, pads, pours and vias inside the 53 × 43 mm outline

    The ESP32-P4 controller, as its copper

    The front copper of the controller in the 3D render above, drawn from its KiCad file: every trace and pad of the four-layer board, with manufacturable Gerbers. Reviewed ready to order.

    2026-09-30 · the Manti PCB engine · KiCad

Everything you make is yours.

  • Every file exports, at any time: the KiCad project, STEP, STL.
  • What you make is yours: the Terms assign the outputs to you.
  • Share any part or the whole project with friends or co-workers. They do not need an account to see it.

Pricing

Start with a free trial. Keep building with Manti Plus.

Free trial

Try Manti on your own work

$0 For 7 days
  • Starts with your first project
  • 20 engine-hours, no card. A drone assembly used about 11 minutes of them
  • 10 GB of storage for your projects
  • US only, one trial per person

Your projects and content may be used to improve our AI models

Manti Plus

Keep building after your trial

$20 A month
  • 20 engine-hours a week
  • 10 GB of storage for your projects

Your projects and content may be used to improve our AI models

Manti Max

For people who build every day

$100 A month
  • Everything in Manti Plus
  • 100 engine-hours a week
  • 50 GB of storage for your projects

Your projects and content may be used to improve our AI models

Don’t take our word for it. It’s free to try.

Try for free today! Sign In